M NEXUS INSIGHT
// arts

What is a pre attenuation pad?

By Rachel Hickman

What is a pre attenuation pad?

The Pre Attenuation Device (or PAD) is a fixed attenuation before the first stage of the input amplifier. This is provided to reduce the input signal on loud sources and prevent overloading the input of the VMS ONE. You may want to use this on drums, guitar amps, or very loud singers.

What does 20dB pad mean?

Thanks! a 20dB pad attenuates the incoming signal by 20db…This enables you to input extremely loud sources and close mic things which would otherwise cause distortion.

Is a cardioid mic better?

Cardioid microphones are great for recoding vocals and anything that’s supposed to sound “dry” and “close”. Figure-8 microphones are equally sensitive to sound from the front and from the rear, but have great rejection for sound coming from the sides.

What is a bidirectional microphone?

A bidirectional mic, sometimes called a figure-of-eight, is equally sensitive to sounds coming from the front and rear of the mic and least sensitive to sounds coming from the sides.

What does pad mean on mixer?

A pad is a switch found on the input channels of many mixers, including all Yamaha MG and MGP Series models. Typically located near the microphone input, it attenuates (reduces) the signal from a microphone before it reaches the mic preamp circuitry inside the mixer: Pad switch.

What is LINE and INST?

Instrument Level is the most variable level signal which will travel through a TS (Tip, Sleeve) jack connection and will also require a preamp to be raised to Line Level. “Inst” should be selected whenever you connect an instrument, such as a guitar or bass guitar, directly to your interface.

What is 10dB pad on mic?

Technical Editor Hugh Robjohns replies: The 10dB (or sometimes 20dB) pad on capacitor mics is intended to prevent the head amplifier (the part of the mic which amplifies the signal picked up by the diaphragm) from overloading when the mic is placed in front of very loud sound sources.

What is a pad switch?

When should you use a cardioid microphone?

Cardioid microphones are used in applications where sound needs to be picked up from the front and sides but not the rear. An example of this may be musical performance where a singer may be singing in the front, a band playing instruments on the sides, with an audience of viewers in the back.

What is cardioid microphone?

Definition of cardioid microphone : a microphone having approximately uniform response over 180 degrees in front and minimum response in back, a polar curve representing its directional response being a cardioid.

What is hypercardioid polar pattern?

A polar pattern name typically used to describe microphone pick up characteristics. Hypercardioid patterns are similar to cardioid patterns in that the primary sensitivity is in the front of the microphone.