How do I setup my ASUS RT router?

How do I setup my ASUS RT router?

1. Connect to Router’s default network name (SSID) Network name (SSID): ASUS_XX.
2. Execute the ASUS Router app.
3. Tap “Setup”.
4. Tap “ASUS Router”.
5. Choose “Allow” to proceed the setup.
6. Tap “Start”.
7. Set the Internet type based on your network condition.
8. Type network name(SSID) and password and tap “Next”.

How do I reset my ASUS RT-N12 wireless N router?

To reset the ASUS RT-N12 D1 to its default settings, you have to do the following steps:

1. Put router into operation.
2. Press Reset button for at least 6 seconds.
3. Restart of the device is automatically executed.
4. Default settings have been restored.

How do I connect to my Asus router directly?

Connect the router’s LAN port to your PC’s LAN port with an Ethernet cable. 1. Enter your router’s IP address in the browser of your device. If you cannot find the IP address, type: in your browser for ASUS router models, or for ASUS range extender models.

How do I access ASUS RT N12?

Asus RT-N12 D1 Default Router Login

1. Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
2. Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
3. The default username for your Asus RT-N12 D1 is admin.

What is the default username and password for Asus router?

admin
2 Connecting to ASUS router Open your Internet browser, and input [ into the address-bar then press [Enter]. Enter [admin] as the default user name and password, click [OK].

How do I enable 5ghz on my wireless router?

The frequency band is changed directly on the router:

1. Enter the IP address 192.168. 0.1 in your Internet browser.
2. Leave the user field empty and use admin as the password.
3. Select Wireless from the menu.
4. In the 802.11 band selection field, you can select 2.4 GHz or 5 GHz.
5. Click on Apply to save the Settings.

How do I activate the router?

But if you want a general walk-through of setting up your home network, these steps should get you fully connected.

1. Check Your Internet Connection.
2. Place the Router.
3. Connect to Power.
4. Connect to Your Internet Source.
5. Access the Router’s Web Interface.
6. Connect Wired Devices.
7. Connect Your PC or Device to Wi-Fi.