How do I fix no bootable device on Acer Travelmate?

How do I fix no bootable device on Acer Travelmate?

Use the following steps to resolve this situation:

1. Hold the power-button for 5 seconds to power off the device.
2. Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.
3. Press F9 and then ENTER to load the default configuration.

How do you fix no bootable device hit any key?

Fix: No Bootable Device — Insert Boot Disk and Press Any Key

1. Preparation.
2. Solution 1: Change the Boot Mode to UEFI.
3. Solution 2: Take Out the CMOS Battery to Reset Certain Settings.
4. Solution 3: Reset the Boot Manager via Command Prompt.

What does it mean when a laptop shows nothing but no bootable device?

Simply put: “No Bootable Device Available” means your computer can’t find your hard drive. Aka: Hard Disk or HDD. The hard drive is where data is stored on your computer (files, programs, photos, everything), this includes Windows or whatever operating system you have installed.

How do I boot my Acer Travelmate?

Press F12 to access the Acer boot menu. Go to the Main menu tab by pressing the right arrow button. Press the down arrow to select F12 Boot Menu.

What do I do when there is no boot device found?

No Boot device found on Windows 10

1. Restart the computer and tap Esc to enter the BIOS interface.
2. Press the right arrow key on your keyboard until the Boot tab is opened. Move “Hard Drive” to the top of the boot order list by pressing “+” or “-”.
3. Press F10 to save the changes and restart the computer.

How do I fix no bootable device?

How do I reset my laptop without a bootable device?

FIX for boot error “No bootable device — Please restart system”

1. From a cold start (complete shutdown)
2. Press the power button and immediatly continually tap F2 key to open the BISO setup.
3. In BIOS go to the ADVANCED menu tab.
4. Select System Configuration.
5. Select Boot Mode.

How do I access bios on Acer Travelmate?

To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the bottom of screen). Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”.

What is the boot key for Acer?

Hot keys for BootMenu / BIOS Settings

Which of the following is not a bootable device?

For example, a hard drive, floppy disk drive, CD-ROM drive, DVD drive, and USB jump drive are all considered bootable devices. However, unless the necessary boot files are stored on the drive, diskette, or disc, the computer cannot boot from that device.