Can you put a dimmer on a 4-way circuit?

Can you put a dimmer on a 4-way circuit?

Anyway, in a 4-way circuit (or more-way), you can replace either 3-way on/off switch (which will either be the first or last switch) with a 3-way dimmer. But it must be a 3-way dimmer, not a basic dimmer.

Does it matter which wire goes where on a 4-way switch?

More videos on YouTube The traveler wires from the two 3-way switches attach to the screws on the four-way switch. Connect the two travelers from one 3-way switch to the bottom two screws on the 4-way switch. It doesn’t matter which traveler wire goes on which bottom screw.

Is a 4-way switch double pole?

Double pole light switches, also known as a four-way switch, are two single pole switches put together. Two separate circuits are controlled by one switch. This is typically used to control a circuit from multiple locations in a series of three switches on one circuit.

What is the difference between 3 way and 4-way switch?

A three-way switch has three terminals; a four-way has four. These control a light from two or three switch locations, such as at the top and bottom of a stairwell, at either end of a hallway, or in a large room with multiple entrances. You can usually replace any single-pole switch with a dimmer.

What is a multi location dimmer switch?

Unlike 3-way dimmer switches, which cannot support multiple dimmers on the circuit, multi-location dimmer switches allow for dimming controls in more than one location. These can be paired with a compatible dimmer switch, non-dimming 3-way switches, or smart-home systems and remotes.

Where does the white wire go on a 4-way switch?

The neutral (white) wire connects to the light fixture(s) and the white wire(s) of the NM cable(s) that connect between the light fixture boxes. This neutral wire terminates at the last light fixture box and does not travel through any switch boxes.

What is a 4-way switch used for?

4-Way Switches Four-way switches are used to control lighting from three or more locations. Four-way switches are used in combination with three-way switches. There are four terminals that provide two sets of toggle positions on a four-way switch.